Dowslake Microsystems

Your location: Home / Products & Solutions

Home

Products

Solutions

Support

Corporate

Home > Products >SMUX Convergence Products

CATS SMUX-FE | E1/T1 and Fast Ethernet over Copper or Fiber

TMD and IP Multiplexer

Product Specifications
| Protocol transparent data transmission for E1/T1
| Data rates: 4 x E1/T1 (2.048/1.544 Mbps) plus 2 x 10/100BaseTx
| Possibility to have 2 x 100BaseFx, user configurable as client or line
| Supports fractional (n x 64 kbps) and grooming services
| External reference clock input port
| Increase the number of interfaces by cascading SMUX-FEs
| Redundant copper or fiber optic interface on the line site, supporting several wavelengths
| Management features like SNMP, Telnet & web-based GUI

| Cost-effective extension of four traditional E1/T1 data interfaces plus two Ethernet interfaces over Packed Switched Networks (PSN)
| Optimized use of packet based infrastructure
| Supports Ethernet, IP, MPLS, VLAN and double VLAN tagging
| Efficient use of existing bandwidth for legacy data via less expensive PSN
| Enables Point-to-Point and Point-to-Multipoint applications
| Supports QoS on different layers depending on the PSN type
| Superior Jitter and Timing Performance

Applications

One of the major applications for SMUX-FE is wireless backhaul. SMUX-FE can feed both 2G and 3G wireless BTS. The dual uplink design allows to offer redundancy against link down.

Another application for SMUX-FE is for simple multiplexing of E1/T1 and Fast Ethernet signals for point-to-point application.

Note: User can configure any of Ethernet port to be either client or line link. Thus, without using SFP, SMUX-FE can be a simple E1/T1 multipler over copper 10/100BaseT.

Order Matrix

Access Multiplexer for voice and data transmission via Ethernet, MPLS or IP networks

Description	code	Model
Fiber multplexer 4xE1+2x10/100BaseT over 2x100BaseFx, 3U rack card. Order SFP separately	4638-006	SMUX-FE/PS-3R

SPECIFICATIONS
Copper Ethernet Port (RJ45)
Number of Ports	2
Bit rate	10/100BaseTx, auto negotiation, auto crossover
Compliance	IEEE 802.1p, IEEE 802.1q , IEEE 802.3, IEEE 802.3u
MAC Address table	1k MAC addresses
E1/T1 Interface Port (RJ45)
Number of Ports	4
Bit rate	2.048/1.544 Mbps +/- 50/32 ppm
Line Coding	HDB3 (E1), B8ZS, AMI (T1)
Impedance	120 Ohm (E1), 100 Ohm (T1)
Fiber-optic Ethernet Port (SFP)
Number of Ports	2
Bit rate Fiber Optic	100BaseFx
Compliance	IEEE 802.1p, IEEE 802.1q , IEEE 802.3, IEEE 802.3u
MAC Address table	1k MAC addresses
Management
Ethernet	10/100BaseT (RJ45)
Local Craft	RS232 (RJ45) Available Only with Stand-alone Packaging
User Interface	SNMP, CLI, Web GUI
IP Capability
Quality of Service (QoS)	According IEEE 802.1p VLAN (priority field), priority labeling (ToS), MPLS label
VLAN	Single or Double Tagging, up to 4096 Vlans
E1/T1 Timing Capability
External Clock Input	2048 kHz (50 ppm)
Clock Recovery	Internal (32 ppm) or From Incoming Trafic
Jitter Performance	G.823, G.824, G.812 (Type VI),EN302 084, T1.101 (Stratum 4) Compliant to G.703, G.704
Mechanical Dimension
Rackmount Card	3U
Card Dimension (mm)	30 x 130 x 190
Package Options	CPE or Plug-in to Racks
Platform	CATS
Density	See CATS1000/3000/6000
Power Consumption	< 8W